Táirge
1390 Meaisín gearrtha ardchruinneas
Taispeáint Táirge
Paraiméadar teicniúil
| Réimse oibre | 1300*900mm | Branda Ceann Léasair | Uirlisí Ray |
| Cumhacht léasair snáithín | Roghnach: 1000W / 1500w / 2000w / 3000W etc. | Comhpháirteanna Croí | Mótar |
| Luas gearrtha uasta | 0-40m/nim | Gné:
| Go hiomlán faoi iamh |
| Déan cruinneas suímh arís | 0.02mm | Modh Oibriúcháin | tonn leanúnach |
| soláthar leictreachas | 220v/50Hz/60Hz | mótair agus tiománaí | Mótar servo na Seapáine YASKAWA & tiománaí / laghdaitheoir Fraincis |
| Teocht an chomhshaoil | 0-35°C | Formáid Grafach Tacaithe | AI, PLT, DXF, BMP, Dst, Dwg, LAS, DXP |
| Am oibre leanúnach | 24 uair an chloig | Limistéar Gearradh | 1300*900mm, 1300*1300mm |
| Meáchan an mheaisín | 1500kg | Príomhphointí Díolacháin | Ard-chruinneas |
| Saol nádúrtha léasair | 100000 uair an chloig | Córas tarchurtha | Tarchur scriú liathróid |
| Bogearraí rialaithe | Cypcut | Luasghéarú MAX | 0.5G |
| Córas Fuarú | Fuarú uisce | Déan cruinneas suímh arís:
| ±0.006mm |
Tiús a ghearradh
| Paraiméadar Gearradh Léasair | ||||||||
|
| 500W | 1000W | 2000W | 3000W | 4000W | 6000W | 8000W | |
| Ábhar | Tiús | luas m/nim | luas m/nim | luas m/nim | luas m/nim | luas m/nim | luas m/nim | luas m/nim |
| Cruach charbóin | 1 | 8--13 | 15--24 | 24--30 | 30--42 | 40--55 | 60--80 | 70--90 |
| 2 | 3.0--4.5 | 5--7.5 | 5.5--8 | 7--9 | 8--10 | 9--12 | 10--13 | |
| 3 | 1.8--3.0 | 2.4--4 | 3.5-4.8 | 4--6.5 | 4.5--6.5 | 4--7 | 4--7 | |
| 4 | 1.3-1.5 | 2--2.4 | 2.8-3.5 | 3.5--4.5 | 4.0--5.0 | 4.2--5.5 | 4.7--5.5 | |
| 5 | 0.9--1.1 | 1.8--2 | 2.5--3 | 3--3.5 | 3.0--4.2 | 3.5--4.2 | 3.8--4.5 | |
| 6 | 0.6--0.9 | 1.4--1.6 | 1.8--2.6 | 2.5--3.2 | 3.0--3.5 | 3.0--4 | 3.3--4.2 | |
| 8 |
| 0.8--1.2 | 1.2--1.8 | 1.8--2.6 | 2.0--3.0 | 2.2--3.2 | 2.5--3.5 | |
| 10 |
| 0.6--1.0 | 1.1-1.3 | 1.4--2.0 | 1.5--2.5 | 1.8--2.5 | 2.2--2.7 | |
| 12 |
| 0.5--0.8 | 0.9--1.2 | 1.2--1.6 | 1.4--2 | 1.6--2 | 1.8--2.1 | |
| 14 |
|
| 0.7-0.8 | 0.9--1.4 | 1.0--1.6 | 1.5--1.8 | 1.7--1.9 | |
| 16 |
|
| 0.6-0.7 | 0.8--1.2 | 0.8--1.2 | 0.8--1.5 | 0.9--1.7 | |
| 18 |
|
| 0.4--0.6 | 0.7--1 | 0.8--1.1 | 0.9--1.2 | 0.9--1.2 | |
| 20 |
|
|
| 0.6--0.8 | 0.7--1 | 0.8--1.1 | 1.0--1.5 | |
| 22 |
|
|
| 0.4--0.6 | 0.6--0.8 | 0.7--0.9 | 0.8--1.0 | |
| 25 |
|
|
|
| 0.3--0.5 | 0.4--0.6 | 0.5--0.7 | |
| Cruach dhosmálta | 1 | 8--13 | 18--25 | 24--30 | 30--42 | 40--55 | 60--80 | 70--90 |
| 2 | 2.4--5.0 | 7--12 | 10--17 | 18--21 | 20--30 | 30--42 | 40--55 | |
| 3 | 0.6--0.8 | 1.8--2.5 | 4--6.5 | 8--12 | 12--18 | 18--24 | 30--38 | |
| 4 |
| 1.2--1.3 | 3--4.5 | 6--9 | 8--12 | 10--18 | 18--24 | |
| 5 |
| 0.6--0.7 | 1.8-2.5 | 3.0--5.0 | 4--6.5 | 8--12 | 12--17 | |
| 6 |
|
| 1.2-2.0 | 3.0--4.3 | 4.0--6.5 | 6--9 | 8--14 | |
| 8 |
|
| 0.7-1 | 1.5--2.0 | 1.8--3.0 | 4--5 | 6--8 | |
| 10 |
|
|
| 0.8--1 | 0.8--1.5 | 1.8--2.5 | 3--5 | |
| 12 |
|
|
| 0.5--0.8 | 0.6--1.0 | 1.2--1.8 | 1.8--3 | |
| 15 |
|
|
|
| 0.5--0.8 | 0.6--0.8 | 1.2--1.8 | |
| 20 |
|
|
|
| 0.4--0.5 | 0.5--0.8 | 0.6--0.7 | |
| 25 |
|
|
|
|
| 0.4--0.5 | 0.5--0.6 | |
| 30 |
|
|
|
|
|
| 0.4--0.5 | |
| Alúmanam | 1 | 4--5.5 | 6--10 | 20--25 | 25--40 | 40--55 | 55--65 | 80--90 |
| 2 | 0.7--1.5 | 2.8--3.6 | 7--10 | 10--18 | 15--25 | 25--35 | 35--50 | |
| 3 |
| 0.7--1.5 | 4--6 | 7--10 | 10--15 | 13--18 | 21--30 | |
| 4 |
|
| 2--3 | 4--5.5 | 8--10 | 10--12 | 13--18 | |
| 5 |
|
| 1.2-1.8 | 3--4 | 5--7 | 6--10 | 9--12 | |
| 6 |
|
| 0.7--1 | 1.5--2.5 | 3.5--4 | 4--6 | 4.5--8 | |
| 8 |
|
|
| 0.7--1 | 1.5--2 | 2--3 | 4--6 | |
| 10 |
|
|
| 0.5--0.7 | 1--1.5 | 1.5--2.1 | 2.2--3 | |
| 12 |
|
|
|
| 0.7--0.9 | 0.8--1.4 | 1.5--2 | |
| 15 |
|
|
|
| 0.5--0.7 | 0.7--1 | 1--1.6 | |
| 20 |
|
|
|
|
| 0.5--0.7 | 0.7--1 | |
| 25 |
|
|
|
|
|
| 0.5--0.7 | |
| Prás | 1 | 4--5.5 | 6--10 | 14--16 | 25--35 | 35--45 | 50--60 | 70--85 |
| 2 | 0.5--1.0 | 2.8--3.6 | 4.5--6.5 | 10--15 | 10--15 | 25--30 | 30--40 | |
| 3 |
| 0.5--1.0 | 2.5--3.5 | 5--8 | 7--10 | 12--18 | 15--24 | |
| 4 |
|
| 1.5--2 | 3.5-5.0 | 5--8 | 8--10 | 9--15 | |
| 5 |
|
| 1.4-1.6 | 2.5--3.2 | 3.5-5.0 | 6--7 | 7--9 | |
| 6 |
|
|
| 1.2--2.0 | 1.5--2.5 | 3.5--4.5 | 4.5--6.5 | |
| 8 |
|
|
| 0.7-0.9 | 0.8--1.5 | 1.6--2.2 | 2.4--4 | |
| 10 |
|
|
|
| 0.5--0.8 | 0.8--1.4 | 1.5--2.2 | |
| 12 |
|
|
|
|
| 0.6--0.8 | 0.8--1.5 | |
| 16 |
|
|
|
|
|
| 0.6--0.8 | |
Príomhchodanna
Iarratas
Tionscal iarratais:
Úsáidtear 1390 Meaisín Gearradh Léasair Ard-Beachtais go forleathan i ndéantúsaíocht Billboard, Fógraíocht, Comharthaí, Comharthaíocht, Litreacha Miotail, Litreacha stiúir, Earraí Cistine, Litreacha Fógraíochta, Próiseáil Miotail Bileog, Comhpháirteanna Miotail agus Páirteanna, Earraí Iarainn, Fonnadh, Racks & Cabinets Próiseáil, Miotal Ceardaíocht, Earraí Ealaíne Miotail, Gearradh Painéil Ardaitheoirí, Crua-earraí, Páirteanna Gluaisteán, Fráma Gloiní, Páirteanna Leictreonacha, Ainmchláir, etc.a chinntiú gur féidir leis oibriú le linn an phróisis gearrtha léasair.
Ábhair Iarratais:
Bileog Cruach Dhosmálta, Pláta Cruach Éadrom, Bileog Cruach Carbóin, Pláta Cruach Alloy, Bileog Cruach Earraigh, Pláta Iarainn, Iarann Galbhánuithe, Bileog Galvanized, Pláta Alúmanam, Bileog Copar, Bileog Práis, Pláta Cré-umha, Pláta Óir, Pláta Airgid, Pláta Tíotáiniam, Bileog Miotail, Pláta Miotail, Feadáin agus Píopaí, etc
Samplaí
Buntáiste
1.Cutting fíneáil, suas le 0.05-0.1mm.Bain úsáid as an gás cúnta cuí, rud a fhágann go bhfuil na slits néata agus réidh, ní gá snasta tánaisteach.
2.Focusing an ceann gearrtha automatically.using braiteoir allmhairithe ard-dul chun cinn capacitive, airde pláta rianaithe dinimiciúil lánaimseartha.Adjusting an airde a ghearradh go huathoibríoch a chuireann cosc ar imbhualadh, is féidir leat a ghearradh ar an pláta míchothrom.
3. Glacann meaisín gearrtha tiomáint mótair servo allmhairithe, modúl líneach ard-chruinneas a allmhairiú, go tapa, cruinneas ard suas le 0.01mm.Saol seirbhíse fada.
4.An úsáid a bhaint as léasair snáithíní chun cinn, na feistí lárnacha a allmhairiú.Cobhsaíocht ard, saolré fada, gan aon soláthairtí, saor ó chothabháil.
Dearadh 5.Professional gléas aisghabhála púdar óir, bhailigh deannach agus deannach an fheiste aisghabhála go léir.Mar sin, go bhfuil an caillteanas ar a laghad.
6.For tionscal jewelry óir agus airgid córas gearrtha léasair saincheaptha gairmiúil, le leas iomlán a bhaint cosán, leas iomlán a bhaint pointe tosaigh gearrtha, ilchiseal, feidhm leagan amach, sábháil am agus ábhar.
Méid 7.Small, tomhaltas íseal fuinnimh, níos lú soláthairtí, cothabháil éasca.Is féidir le aer comhbhrúite a ghearradh freisin, ar chostas íseal.
